How To Easily Jailbreak Your iPhone 3G/3GS With Success

Getting Started (It’s Untethered)

Posted by :Adam On : February 12, 2013

Category: iPhone

To maximize the benefits of the mobile device from Apple, you must install and download the most reliable Jailbreak iPhone 3G/3GS available on the market. Here are some steps you must consider when removing the restrictions of Apple’s mobile device.

To get the needed tools to get started right away, visit: Jailbreak Tool

Download it. Once you have found the right tool, you may start downloading it to your computer. It is good to know that most programs that can perform the said operation have different versions. This means that they can run on Mac, Windows and Linux.
Back-up. Before you hit the button that starts removing the restrictions, you must first backup everything inside the said device. You can opt to make a back-up copy to your hard drive or via iCloud. Local back-ups are said to be a better option.
Transfer downloaded apps to iTunes first. This is especially important to avoid losing any applications, if you need to restore your device to factory defaults.
Launch the program. After you have backed-up everything, you can start removing the restrictions by clicking on the “start” button. It may take a while before the process is completed. It is important that you do not disconnect the device while the process is still ongoing. Disconnecting it may damage your device.
Start enjoying the benefits. Once the process has been completed, the device should reboot. When it comes back on, your device will be the same as it was before. However, you will notice an icon for the jailbreak. It houses all themes, apps, and tweaks that make this process more fun and enjoyable. There are a lot of tweaks and apps that are worth your time. So, take the time to explore them all and install apps that you think would be useful to your daily activities.

To have the best solution in removing the restrictions of apple, then you must grab this tool to get started right away. Visit: Jailbreak Tool

Before removing the limitations of the said mobile device, be sure to read the guidelines mentioned above.

How To Force Quit On Mac

Posted by :Adam On : February 5, 2013

Category: MAC

There are 4 ways to do it. Some may also be working with the iPhone 3G/3GS.

Press these buttons simultaneously: Command, Option and Esc (or escape).

A window will appear. A program that has crashed will have a “not responding” message next to it. Select that program. Then, push the “Force Quit” button found at the lower right portion of the window.

Click the Apple icon on top left of your screen.

If the first method does not work, you can use this method. After clicking on the Apple icon, a menu appears. Scroll down until you see the “Force Quit” option. A window appears. Then, choose the app that is not responding.

Use the Dock method.

If you have a two-button mouse, use it to right click on the app’s icon found in the Dock. Then, press the Option button on your keyboard. However, if you do not have this type of mouse, you may still use your current mouse. Right-click and hold it until a window appears that lets you close an app.

Try the terminal method.

This must only be used if you are an advanced user. Open your Utilities folder. It is located in the Applications folder. A window appears. Type in the word “top.” Then, you will be presented with various pieces of information. Under the COMMAND column, find the app that you want to close. When you find the name of the app, look at its corresponding PID number. Then, type the letter “q.” After that, type “kill” and the corresponding PID number. Remember, you must only use this method if the normal methods mentioned above do not work the way you want them to work.

Steps In Making Time Capsule A Wireless Network

Posted by :Adam On : May 22, 2013

Category: Time Capsule

Time Capsule can be installed and setup to be used as a wireless network. Here are the steps you must follow:

Unpack the package
Hook it up.
Connect the adapter to the back of the device.
Plug the modem into the Internet port
Insert the required CD to install the device into your computer
Double-click Airport to start the installation
Follow the instructions.
Enter admin username and password when prompted
Hit the Ok button
Plug the adapter into the electrical outlet. The device boots up. It may take a few minutes.
Click the Airport icon located at the top right hand of the screen.
Choose Apple Network from the list.
Open Finder window
Run Airport Utility
Click Continue. This will set up the base station.
Enter a username and password for your Time Capsule.
Click Continue to proceed.
Tick “I want to create a new wireless network” then hit the Continue button.
Enter name and password of your wireless network.
Follow the succeeding instructions.

Tricks To Help Get You Started With iMovie

Posted by :Adam On : May 22, 2013

Category: iLife

The new iLife offers new features for iMovie. Listed below are some tricks to help you get started.

Use multi-touch when adding new media to your Project. You can do this by selecting a clip and using your three fingers in swiping up your trackpad. You can also move the pointer over the Project browser and pinching two fingers closed or open when contracting and expanding a gesture.
Import videos from iPhone to iMovie. You just have to plug in your iPhone to your computer and iMove will offer to import your movies from your phone in your computer’s Camera Roll.
Analyze clips using People Finder. This app can analyze video clip for Stabilization and be marked as camera pans. To do this, go to File, choose Analyze video option and click on Mark Camera Pans.
View Timeline using the traditional way of editing. If you do not want to use non-linear editing, you can still use the more traditional way of editing and viewing your videos in iLife’s iMovie.

How To Install Windows 7

Posted by :Adam On : March 11, 2013

Category: Windows 7

1. Get the Windows 7 DVD and then insert it in your DVD-ROM.

2. Start your computer and allow the operating system to boot up and provide you with progress bar.

3. Once the process is complete you will then see a new screen which allows you to set your time, language, keyboard or input method and currency format. You just need to select your required settings and once you’re done, click on continue to proceed.

4. Another screen will appear and it will allow you to repair or install Windows 7. What you need to do is to click on the “Install now” button in order to clean install.

5. You will see another window that contains the license terms, just read it and check the small ox adjacent to the text that says you accept the license terms. You may then click on the next button to continue.

6. You will see another window that provides you with two options namely the Upgrade and Custom (advanced). Just select Custom option since you are doing a clean install.

7. The next thing that you should do is to simply select the location where you would like the operating system to be installed. Click on the next button and it will start the installation.

8. After the computer is done rebooting you can then select your computer name and user name. Create your administrator account and then type the product key that came with the operating system.

How To Reboot Your iPad

Posted by :Adam On : March 11, 2013

Category: iPad

1. Locate and hold the Sleep/Wake button of the device down for a few seconds until the screen provides you with a button.

2. You will then be prompted to slide the button and just do so in order to turn the device off.

3. The screen will provide you with directions on how to reboot the device such as sliding the button to the left side.

4. If in case the unit is stuck or frozen, hold the Home button and the Sleep/Wake button down simultaneously. This will compel the unit to automatically power off.

5. A circle of dashes will then appear on the screen indicating that the unit is busy. The screen will then turn completely black once the unit is finished shutting down.

6. While the screen of the unit is completely black hold the Sleep/Wake button down as it will allow you to do the restart.

7. Release the Sleep/Wake button once you see the Apple logo at the center of the screen and after a few moments the logo will then reappear.

8. If you want to do a hard reboot locate the Power and Home buttons and then hold them down for about 10 seconds.

9. When the Slide to Power Off button or switch appears on the screen just ignore it and continue holding the two buttons.

10. Hold the buttons until the screen is completely black and the Apple logo appears. It will then automatically reboot without requiring you to touch the screen.

How To Use Final Cut Pro

Posted by :Adam On : January 29, 2013

Category: Final Cut Pro

1. The first thing that you need to do is open the application by moving the cursor to your dock, locating it and clicking on it if it’s on your dock. You can also click on applications on your hard drive and then click on the tool. Another way to open it is to simple press and hold the command key and then press the space bar. You type the name of the application and once it appears just click on its icon.

2. During this phase you will receive a message telling you that your camera/deck is not detected if the camera/deck is not physically connected through a USB cable. So what you can do is to simply click on continue, plug it in and turn it on.

3. The next thing that you should do is to simply set a scratch disc and the go to the upper left part of the opened application. Click the FCP text in order to open the drop-down menu.

4. Go to the “System Settings” and then highlight it to access a new window. This window normally has two columns with Clear and Set buttons. Just click on the “Set” option and then find a place where you want the application to save your render files.

5. Press Shift+apple+N to go to File New and to create a New Project. You need to ensure that the camera is powered off in order to prevent the port of the camera or computer from burning.

6. Plug it in and then capture logging by going to File and finding log and Capture. You have to ensure that the video you recorded is being played by the camera through viewing it on the screen.

7. You may edit your video, check out if it is imported by looking at the left hand box and then export your footage.